FRESH IDEAS FOR YOUR HOMEInquiry Now >
Our 95 MTS Series softeners provide up to 132 gpm continuous soft water (Quadplex system with one tank allowed off line for regeneration at all times) 24 hours a day. They are engineered and thoroughly tested to provide years of reliable, trouble free maintenance.
MTS controller: Fully Programmable remote mounted control box. available to BNT 95 and 95HF valves control.
Parallel Flow: All tanks on-line and are interlocked so only one can regenerate at a time.
Alternating Flow: At least one tank is always off-line for regeneration or ready in standby.
Demand Flow: Tanks come on or off-line according to the flow rate demand so that the system is always operating at optimum efficiency.
Remote start singnal input: A remote button to be added so that a manual regeneration can be initiated from another location.
System interlock: A external signal can be accepted to lock out and prevent the system from regenerating.
Advanced Diagnostic Information: Easily trouble shoot and access system information displayed in real time.
Auxiliary Outputs: Up to two programmable outputs / relays can be added.
Battery Backup system: In the event of a power loss, the system can continue to meter and monitor water usage for up to nine hours
Polishing Rinse is optinal: A small pump recycles water from outlet to the inlet to keep the product water polished for high quality.
All systems are available in single, duplex, triplex, and quadplex operation.
Apartments - Boiler Treatment - Motels - School - Nursing Homes - Office Buildings - Resorts - Restaurants - Office Buildings - Hospital - RO Pre-Treatment - Cooling Tower - Car Wash - Dairies - Factories - Laundromats
95 MTS Systems
MTS systems with smaller tanks have equal flow rate and capacity compared to large tank & brass valve systems.
MTS systems can be expanded quickly. Additional tanks can be added to increase the capacity of the systems, when investments change or the soft water needing change.
According to the consumption of soft water, MTS systems can be equipped by multiple tank size.
Easier to install
MTS systems are easier to install and less occupied area.
The main controller of MTS systems is installed at a convenient to use location rather than on top the tall tanks
95 MTS-<Qty tanks>- <cubic feet resin>
MTS 3-5: Triplex 1865 tanks with 5 cubic feet resin each tank, and 3 brine tanks featured
|Specifications||MTS _ -3||MTS _ -4||MTS _ -5||MTS _ -7||MTS _ -10|
|High Efficiency (48g/l)|
|Salt Used - Kg||4.1||5.4||6.8||9.5||13.6|
|System Capacity - Gram CaCO3||2,700||3,600||4,550||6,350||9,100|
|Standard Capacity (96g/l)|
|Salt Used - Kg||8.2||10.9||13.6||19.1||27.2|
|System Capacity - Gram CaCO3||4,700||6,200||7,800||10,900||15,500|
|High Capacity (160 g/l)|
|Salt Used - Kg||13.6||18.1||22.7||31.8||45.4|
|System Capacity - Gram CaCO3||5,800||7,800||9,700||13,600||19,400|
|Flow Rate per tank:|
|Flow Rate @15 psi Pressure Drop - T/H||3||3.9||4.9||6.7||8.8|
|Back Wash Flow Rate - T/H||1.5||2||2.5||3.5||4|
|Resin Quantity (Litre)||85||113||142||198||283|
|Brine Tank Size/ Volume||Ø 585 x 1040mm / 200L|
|Salt Storage Capacity||250 Kg|
|Plumbing Connections||1", 1.25", 1.5" BSP.NPT|
|Resin Type||Canature 8% High Capacity Ion Exchange Resin|
|Electrical Requirements||120V-240V 50/60 Hz --- 24VAC|
|Water Temperature||Min 1 - Max. 42 Degrees Celsius|
|Water Pressure||Min. 0.14 - Max. 0.87 Mpa|