FRESH IDEAS FOR YOUR HOMEInquiry Now >
1. Noryl valve body, long service life, anti-corrosion, low cost.
2. Classic piston, seal and spacer design, more reliable and less failure.
3. High ﬂow rate for commercial softening and filtration application.
4. Valve come with standby cycles and NHWBP option.
5. Up to 9 cycles are available to be set for proper application.
6. Valve type is optional: DF softener, UF softener and filter valve are available for your choice.
7. System interlock function was added for regeneration logic of multi-tank system, along with single & multi tank normal application, save your initial investment.
8. More history information & diagnostics to view, knowing better of your system.
9. Up to 5 DIR for single tank system: Days, Calendar, Meter Immediate, Meter Delay, Meter Override.
10. Two auxiliary outputs/relays and one input/relay can be programmed on PCB.
11. Precision brining against “depleted” portion of resin, volume of water refilled prior to the scheduled regeneration will be proportional to the amount of capacity left in the system, save more water and salt.
12. Outlet fitting come with integrated meter, other standard meter is also acceptable.
|Valve Body Material||Noryl|
|Plumbing Connections(NPT&BSP)||1.5"/2.0” with BSP/NPT thread|
|Tank Thread||4"-8 UN|
|Distributor Pilot||OD1.9"& 50mm|
|Drain Line||1.5"/2.0” with BSP/NPT thread|
|Brine Line||1/2” Quick Connect Elbow|
|Meter Capacity Range||0~999999.9 M3 (0~999999999 Gal)|
|System Application||Single /Series Interlock/Multi tank MTS|
|Valve Type||DF and UF softener, flter|
|Adjustable Cycles||0-99Mins ;0-199 Mins(Brine)|
1050D -- DF Softener:
1050U -- UF Softener:
1051 -- Filter:BW,Rinse(STBY)
|Dimension With Adapter||63 x 31 x 33 cm LXWXH|
|Net Weight||7.8 Kg|
|Flow Rates(Valve Only)|
|Continuous ﬂow (15 psi Drop)||15.9 M3/H (70gpm)|
|Peak ﬂow (25 psi Drop)||20.4 M3/H (90gpm)|
|Max Backwash ﬂow(25 psi Drop)||15.9 M3/H (70gpm)|
|Softener||21”- 30” Tank|
|Filter||18” -24” Tank|
|Input||100V - 240V AC 50/60Hz 1.5A|
|Output||24V DC 2.0A|
|Working Pressure||0.21 - 0.87MPa (30~125psi)|
|Water Temperature||1 - 42℃|